|
Tube complement (2 x 12AX7, 3 x 12AT7) or (4 x 12AX7, 1 x 12AT7)
Gain MC Mode (2 X 12AX7, 3 X 12AT7) 64 dB or (4 X 12AX7, 1 X 12AT7) 69dB
Gain MM Mode (2 X 12AX7, 3 X 12AT7) 43 dB or (4 X 12AX7, 1 X 12AT7) 48dB
Frequency response RIAA 20 Hz to 20 kHz ±0.1 dB
Signal-to-Noise Ratio 80 dB, A weighted
Output impedance 500 ohms nominal (12AT7 "V5" dependent)
Input impedance Infinite with no load resistors connected
Note: load resistors can be connected externally via RCA connectors or soldered internally
Absolute polarity Non-inverting (all modes)
Power Requirements Standard IEC connector - most international voltages available
Dimensions 18" wide x 3.5" high x 10.5" deep
Warranty 3 years, parts and labor; tubes: 90 days
VTPH-2 with black front panel
VTPH-2 wiht rear panel
VTPH-2 inside
External MC load resistor RCA plugs
| 
; EffectiveNewWin.focus(); "vtph-2 tubed phono preamlifier rear panel sliver"){kind=small}
; EffectiveNewWin.focus();){kind=link}
; EffectiveNewWin.focus();){kind=link}
; EffectiveNewWin.focus();){kind=link}
; EffectiveNewWin.focus();){kind=link}
; EffectiveNewWin.focus();){kind=link}